septiembre 2021

Drum Chipper Buying Guide for Wood Chip PreparationA astilladora de tambor prepares logs, slabs, branches and other wood material into chips for biomass fuel, wood processing and pellet production. For a pellet line, the chipper should be selected together with the molino de martillo, dryer, pellet mill and conveying layout, because chip size and feeding stability affect the next process.This guide explains astilladora de tambor working principles, key selection factors, maintenance points and the information TCPEL needs before recommending a suitable machine. If your project uses smaller logs or branch material, also compare a disc chipper before confirming the front-end chipping solution.What Is a Drum Chipper?A astilladora de tambor is a wood chipping machine that uses knives mounted on a rotating drum to cut logs, slabs, branches and wood residues into chips. It is normally used when raw wood is too large for direct molino de martilloing or pelletizing.For biomass and wood pellet projects, a astilladora de tambor is often selected for heavier feeding, larger raw material size and more continuous operation than a small disc chipper. The final choice still depends on material size, capacity and line layout.How a Drum Chipper WorksMaterial enters through the feed system and moves toward the rotating drum. Knives on the drum cut the wood against a counter knife, and chips are discharged for the next process. Stable chip quality depends on hoja sharpness, feeding speed, drum speed, raw material moisture and machine adjustment.Before long shifts, operators should check the knives, counter knife, bearings, feeding device, guards and discharge area. Uneven feeding or worn knives can increase power load and create irregular chips.Where Drum Chippers Fit in Pellet LinesIn a wood pellet line, the astilladora de tambor usually works before the molino de martillo. It reduces logs and larger wood pieces into chips that are easier to grind, dry and pelletize.Chipping: reduce logs, slabs or branches into chips.Grinding: use a molino de martillo to prepare smaller particles.Drying: adjust moisture with a secador rotatorio when required.Pelletizing: press prepared material with a máquina de pellets de madera.Cooling and packing: stabilize pellets before storage or shipment.Drum Chipper vs Disc ChipperBoth astilladoras de tambor and disc chippers can prepare wood chips, but the selection logic is different. ArtículoDrum chipperDisc chipper Cutting structureKnives mounted on a rotating drumKnives mounted on a rotating disc Typical materialLarger logs, slabs and higher-volume wood preparationPrepared logs, branches and smaller wood material Typical projectContinuous biomass, wood chip and pellet line preparationSmall to medium wood preparation before grinding Selection focusFeed opening, output, feeding stability and hoja maintenanceChip size, compact layout and suitable raw material diameter Final choiceConfirm raw material photos, maximum size, target chip size, capacity, voltage and working hours before quotation. Motor, Voltage and Site RequirementsIndustrial astilladoras de tambor are usually driven by electric motors in fixed production lines. The motor power, voltage, control cabinet, cable standard and site power supply should be confirmed before manufacturing.For export projects, TCPEL checks voltage, phase, frequency and local electrical requirements with the buyer. If the machine will work outdoors or in a dusty workshop, guards, foundation, feeding method and dust-control equipment should also be considered.Chipper, Shredder and Mulcher DifferencesA chipper, shredder and mulcher may all reduce wood or plant material, but they are not the same type of production equipment. For pellet plants, the key question is whether the output material is suitable for grinding, drying and pelletizing.Drum chipper: prepares chips from logs, slabs and larger wood for industrial processing.Disc chipper: prepares chips from smaller wood and branch material.Shredder or mulcher: usually produces less uniform material and may not be suitable before pelletizing without further grinding.When a Drum Chipper Is the Right ChoiceA astilladora de tambor is normally the right choice when the project needs continuous wood chip preparation, larger feed opening or stronger feeding than a small disc chipper can provide. For occasional small-branch processing, a smaller machine may be enough.For a pellet project, do not select the chipper alone. Match it with the molino de martillo capacity, dryer evaporation load, pellet mill output and daily working hours.Key Specifications Before QuotationBefore quotation, confirm the main specifications that affect model selection and line layout. Unclear raw material size or target output can lead to an oversized or undersized machine.Raw material type: logs, slabs, branches, waste wood or mixed material.Maximum diameter and length before chipping.Target chip size and downstream molino de martillo requirement.Required capacity and working hours per day.Voltage, frequency and workshop power condition.Need for conveyor, magnetic separator, dust collector or complete pellet line.Operation and Maintenance BasicsSafe operation and regular maintenance are important for stable chip size and machine life. Operators should keep hands, clothing and tools away from the feed opening, remove metal or stones from raw material, and stop the machine before inspection.Keep knives sharp and replace damaged hojas in time.Check counter knife clearance according to the manual.Inspect bearings, belts, bolts, guards and lubrication points.Feed material steadily and avoid sudden overload.Drum Chipper FAQThe questions below summarize common selection points for astilladoras de tambor in wood chip and pellet production projects.What is a astilladora de tambor used for?A astilladora de tambor prepares logs, slabs, branches and wood residues into chips before grinding, drying or pelletizing.Is a astilladora de tambor suitable for wood pellet production?Yes. It can reduce larger wood into chips before molino de martilloing and pelletizing, especially in continuous biomass pellet lines.What is the difference between a astilladora de tambor and a disc chipper?A astilladora de tambor is usually selected for larger feed size and heavier continuous work. A disc chipper is often used for smaller wood and branch preparation.What chip size is needed before pellet production?Chip size should match the molino de martillo and downstream process. Final particle size is normally controlled again by molino de martilloing.What information should I send before quotation?Send raw material photos, maximum diameter and length, target chip size, required capacity, voltage, working hours and destination port.Can TCPEL provide a complete line after the chipper?Yes. TCPEL can combine the chipper with molino de martillo, secador rotatorio, pellet mill, cooler, screener and packing machine according to project scope.Related TCPEL pages: disc chipper guide, molino de martillo, secador rotatorio, máquina de pellets de madera, biomass pellet machine.Send raw material size and capacity by WhatsApp for a astilladora de tambor or pellet line recommendation.TCPEL Drum Chipper RecommendationDrum chipper working videoWatch the astilladora de tambor working test on this page. The video player loads only after you choose to play it.Watch video on this pageTCPEL can recommend a astilladora de tambor according to raw material size, required capacity, chip size, voltage and complete line scope. For wood pellet production, the chipper can be supplied as a single machine or connected with molino de martillo, dryer, pellet mill, cooler, screener and packing machine.Send raw material photos or videos, maximum size, target output, voltage and destination port by WhatsApp. TCPEL will check whether a astilladora de tambor, disc chipper or other front-end configuration is more suitable.TCPEL Support for Drum Chipper ProjectsTCPEL focuses on practical equipment selection for biomass and pellet production projects. The recommended configuration depends on material condition, production target and project scope, rather than using one machine for every buyer.Model recommendation based on raw material size and output requirement.Integration with molino de martillo, secador rotatorio and pellet line equipment.Blade, counter knife, lubrication and basic running checks before delivery.Export packing, shipping marks and basic operation guidance according to order scope.

Drum Chipper Buying Guide for Wood Chip Preparation

Secadora: La Guía de Compra Definitiva

10 Razones principales por las que su máquina de pellets no descarga y baja capacidad

2021 Version Wood Pellet Indonesia: Wood Pellets Production and Wood Pellet Indonesia