Flat Die Pellet Machine for Small Feed and Biomass Pellets

Name: Mesin Pelet Mati Datar
Brand: TCPEL

5,0 berdasarkan 28 penilaian dan ulasan

Merek:

TCPEL

Model:

TCZL400

Katagori :

Mesin Pelet Mati Datar

Kapasitas :

Typical 100-1000 kg/h wood pellet model range

Kisaran harga:

$6800-16000 berdasarkan konfigurasi

Jangka Waktu Pembayaran:

T / T / Visa / Mastercard / American Express / Kartu Discover

Waktu pengiriman:

10-15 hari setelah mendapatkan pembayaran deposit

Flat Die Pellet Machine Selection Overview

TCPEL flat die pellet machines are compact pellet mills for small feed, wood and biomass pellet projects. The TCZL model range is commonly used for small farms, test production and local pellet workshops where raw material size, moisture and die diameter can be controlled before pelletizing.

Typical output depends on raw material type, moisture, pellet diameter, die and roller condition, feeding stability and daily working hours. For higher continuous capacity, compare ring die pellet machines or a complete pellet production line.

Suitable Applications for Flat Die Pellet Machines

Flat die pellet machines can be used for prepared animal feed formulas, sawdust, rice husk, corn stalk, straw, peanut shell and other small-batch biomass materials. The material should normally be crushed to suitable size and adjusted to proper moisture before pelletizing.

For animal feed projects, compare the Mesin Pelet Pakan page. For larger biomass output, review Pellet Making Machines or complete line configuration.

Flat Die Pellet Machine Model Parameters

Model	Daya (kw)	Kapasitas untuk pelet kayu (kg/jam)	Berat mesin (kg)	Dimensi mesin (mm)
TCZL250	15	100-200	400	1120x440x1060
TCZL300	22	200-400	800	1280x560x1220
TCZL400	37	300-500	900	1350x550x1320
TCZL450	55	600-800	1500	1620x690x1600
TCZL550	55	800-1000	1600	1700x690x1600

Flat Die Pellet Mill Advantages and Maintenance Points

The central spindle is quenched and tempered to support stable operation under normal pelletizing load. Final machine selection should match raw material and working hours.

The lubrication system supports routine maintenance of the main shaft. Check oil type and maintenance interval according to the machine manual and production load.

Motor configuration is selected according to model, power requirement and destination voltage. Confirm local voltage and frequency before quotation.

Peredam terbuat dari bahan berkekuatan tinggi, yang dapat memastikan masa pakai yang tahan lama dan lebih lama untuk pekerjaan berat.

Suku Cadang Mesin Pelet Die Datar

Gambar Detail Mesin Pelet Mati Datar

PERTANYAAN YANG SERING DIAJUKAN

What is a flat die pellet machine?

A flat die pellet machine compresses prepared raw material through a flat die to make small feed, wood or biomass pellets. It is commonly selected for farms, test production and small workshops.

What materials can a flat die pellet machine process?

Yes, it can process suitable feed formulas and biomass materials after crushing and moisture adjustment. Final output depends on material type, formula, pellet diameter and die condition.

Can a flat die pellet machine make animal feed pellets?

Smaller TCZL models are usually selected for lower output or trial production. TCZL400 is a common reference for around 300-500 kg/h wood pellet output, depending on raw material and operation.

Can a flat die pellet machine make wood or biomass pellets?

The pellet diameter depends on the die installed and the target use. Confirm animal type, biomass material or final pellet requirement before choosing the die.

How often should the die and roller be checked?

Check die, roller, lubrication and fastening condition regularly. Abrasive raw materials and longer working hours require more frequent inspection.

When should I choose a ring die pellet machine instead?

For higher continuous capacity, industrial operation or complete production lines, a ring die pellet machine is usually more suitable than a small flat die model.

What is the difference between a flat die and ring die pellet machine?

Alternar contenido

How do I choose the right flat die pellet machine model?

Alternar contenido

What spare parts need regular replacement?

Alternar contenido

Can this machine be used in a small pellet production line?

Yes. A flat die pellet machine can be combined with a pabrik palu, mixer, conveyor, pendingin pelet and packing machine to build a small feed or biomass lini produksi pelet.

If your project is mainly animal feed, compare TCPEL’s mesin pelet pakan. For larger sawdust or biomass output, review the mesin pelet kayu page or compare a ring die pellet machine.