Water droplets inside pellet bags do not always mean inadequate sawdust drying. Check cooling, finished-pellet moisture content, packaging and storage separately. TCPEL’s guide includes practical checks and a field service case.
Condensation in Wood Pellet Bags: Causes | TCPEL Read More »
A new wood pellet mill die can reduce output and raise motor current. Check specifications, installation and break-in separately. Stable production with ordinary sawdust confirms more than occasional pellet
Wood Pellet Mill Low Output After New Die | TCPEL Read More »
Wood pellet mill roller slip can reduce output while sawdust accumulates. Check feeding, moisture, die holes and roller condition before changing the gap. Free roller rotation also matters.
Wood Pellet Mill Roller Slip and Gap Adjustment | TCPEL Read More »
Sawdust left inside a pellet mill die can harden overnight. Learn how oily flushing mixture displaces sawdust before shutdown. Follow the correct shutdown sequence and collect startup discharge separately.
Wood Pellet Mill Die Flushing Before Shutdown | TCPEL Read More »
Pellet mill press roller bearings can get hotter after greasing. Check grease quantity, delivery and compatibility before adding more. Compare temperature trends and investigate mechanical causes when necessary.
Pellet Mill Roller Bearings Hotter After Greasing | TCPEL Read More »
Pellet mill high current after a sawdust batch change? Check actual feed rate, sawdust moisture, particle size and possible mechanical or electrical causes.
Why Pellet Mill Main Motor Current Rises After a Sawdust Batch Change？ Read More »
Excess Fines in Bagged Wood Pellets Where to Check First? Wood pellets may look intact at the pellet mill outlet, yet the bagged product contains more broken pellets and fine wood particles after cooling, conveying and bagging. These small particles and powder are commonly called fines. Before changing equipment settings on the wood pellet production
Wood Pellet Fines After Bagging: Causes & Fixes | TCPEL Read More »
Why Feed Pellet Output Drops After Fitting a Smaller-Hole Die Changing to a smaller pellet diameter can reduce the output of a flat die feed pellet machine. This can happen without a change of motor or recipe, because the replacement die changes the resistance the feed has to overcome. It is tempting to open the
Smaller Die Holes, Lower Feed Pellet Output? | TCPEL Read More »
How to Make Ice Melt Pellets With Our Pellet Machine? Case Study: Ice Melt Pellets Production for Korean Government Project In winter, many regions experience heavy snowfall or even blizzards, which significantly affects transportation and daily mobility. As a result, the demand for snow melting pellets rises dramatically. Recently, we received a request from a
How to Make Ice Melt Pellets With Our Pellet Machine? Ice Melt Pellet Machine Read More »
Key Factors Influencing Biomass Pellet Hardness Biomass pellets are a type of clean energy that play a crucial role in energy conversion and environmental protection. The hardness of pellets is an important quality indicator that directly affects their combustion efficiency, storage stability, and transportation convenience. This article will thoroughly analyze the various factors that influence
Key Factors Influencing Biomass Pellet Hardness Read More »