Which model is suitable for 800-1000 kg/h feed production?

TCF300 is the listed typical 800-1000 kg/h model. Final selection should confirm formula, die size, raw material condition and voltage.

Do I need a crusher and mixer before the pellet machine?

Usually yes. Crushing controls particle size, and mixing keeps the formula uniform.

Feed Pellet Machine for Animal Feed Production

Q: What raw materials can be used in a feed pellet machine?

Corn powder, soybean meal, wheat bran, grass powder, alfalfa, straw powder, rice husk powder and premix materials can be used after preparation.

Inclined roller feed pellet machine design
TCF models for poultry and livestock feed
Typical 400-600 kg/h to around 3 t/h capacity
Model selection by formula and pellet diameter
Single machine or complete feed pellet line
Machine testing before delivery
Export packing and operation guidance

Feed Pellet Machine Selection Overview

TCPEL supplies TCF series inclined roller feed pellet machines for farms, feed mills, distributors and livestock feed production. Typical capacity ranges from about 400-600 kg/h to around 3 t/h, depending on raw material formula, moisture, pellet diameter, die condition and operating method.

For model selection, send raw material, required capacity, pellet diameter, voltage and destination port. TCPEL can recommend a single feed pellet machine or a complete feed pellet production line with crusher / hammer mill, mixer, conveyor, feed pellet machine, pellet cooler and packing machine.

Common electrical options include 380V / 400V / 415V, 50Hz, 3 phase. Voltage can be customized according to local power supply. WhatsApp: +8615966681218.

The inclined roller and flat die assembly is designed for stable compression during animal feed pellet production. Die material and roller condition should be checked according to raw material and working hours.

Direct coupling helps keep the machine structure compact and practical for farm or local feed processing layouts. Final motor and electrical configuration should match destination voltage.

The motor configuration is selected according to model, voltage, frequency and project requirements. TCPEL confirms power supply details before quotation.

The feeding inlet and discharge area support steady material flow when raw materials are crushed, mixed and adjusted to suitable moisture before pelletizing.

The gearbox and transmission structure should be lubricated and checked before operation. Regular maintenance helps keep pelletizing stable over daily use.

Lubrication points are arranged for routine maintenance. Use the confirmed oil type and maintenance interval according to the machine manual and working load.

Feed Pellet Machine Model and Capacity Reference

Use these typical TCF model ranges as a starting point. Capacity depends on feed formula, raw material condition, moisture, pellet diameter and operation.

TCF250: 15kW, typical 400-600 kg/h, small farm feed production.
TCF300: 22kW, typical 800-1000 kg/h, medium poultry and livestock feed.
TCF350: 30kW, typical 1000-1200 kg/h, commercial livestock feed processing.
TCF400: 37kW, typical 1400-2000 kg/h, large farm and local feed supplier.
TCF550: 90kW, around 3000 kg/h, higher capacity feed pellet project.

Model	Capacity	Roller Type	Power	Voltage(V)	Weight	Dimension(mm)
TCF150	150-200kgs/h	Inclined two rollers	7.5kw	380V，50/60HZ, 3PHASE	190kgs	1220620840
TCF200	300-400kgs/h	Inclined two rollers	11kw	380V，50/60HZ, 3PHASE	270kgs	14206701100
TCF250	600-800kgs/h	Inclined two rollers	15kw	380V，50/60HZ, 3PHASE	480kgs	16607401220
TCF300	800-1000kgs/h	Inclined two rollers	22kw	380V，50/60HZ, 3PHASE	650kgs	18308801560
TCF350	1000-1200kgs/h	Inclined two rollers	30kw	380V，50/60HZ, 3PHASE	750kgs	19609201680
TCF400	1400-2000kgs/h	Inclined two rollers	37kw	380V，50/60HZ, 3PHASE	900kgs	25509801600
TCF450	2000-2500kgs/h	Inclined two rollers	45kw	380V，50/60HZ, 3PHASE	1500kgs	278011001700
TCF550	2500-3500kgs/h	Inclined three rollers	75kw	380V，50/60HZ, 3PHASE	1800kgs	290013001900
TCF650	3000-4000kgs/h	Inclined three rollers	90kw	380V，50/60HZ, 3PHASE	2100kgs	295015002000
TCF700	4000-5000kgs/h	Inclined three rollers	110kw	380V，50/60HZ, 3PHASE	2500kgs	300016002100
TCF800	5000-6000kgs/h	Inclined three rollers	132kw	380V，50/60HZ, 3PHASE	2900kgs	315018002200

About TCPEL Feed Pellet Equipment

TCPEL manufactures pellet equipment for feed and biomass projects, with support for model selection, production line configuration, machine testing and export packing. For feed pellet projects, buyers normally confirm raw material, target capacity, pellet diameter, voltage, working hours and destination port before quotation.

Why Choose TCPEL for Feed Pellet Machines?

Practical Model Selection

We recommend models according to formula, output requirement, pellet diameter, working hours and site conditions.

Machine Testing Before Delivery

Machine configuration, die and roller installation, lubrication and basic running condition are checked according to the confirmed order scope.

Single Machine or Complete Line

The machine can be supplied alone or combined with crusher, mixer, conveyor, cooler, screener and packing machine.

Export Support

Packing, shipping marks and basic operation guidance can be prepared according to the confirmed order and destination.

Operation Guidance

TCPEL can provide basic operation guidance, maintenance notes and machine photos or videos when required for shipment confirmation.

Quotation Information

Send raw material, required capacity, pellet diameter, voltage, working hours and destination port for a clearer model or line recommendation.

Feed Pellet Machine Beginner Guide

Read Feed Pellet Machine Guide

What Is a Feed Pellet Machine?

A feed pellet machine compresses prepared feed ingredients into uniform pellets for poultry, cattle, sheep and other livestock. Before pelletizing, raw materials should normally be crushed to a suitable powder size, mixed evenly and adjusted to the right moisture range for the selected die.

How a Feed Pellet Machine Works

The basic process is crushing, mixing, steady feeding, pelletizing through the die, cooling, screening and packing. The pellet machine presses the prepared mash through die holes, while roller pressure, material moisture and die diameter influence pellet shape, output and stability.

Feed Pellet Machine Types

Flat die and ring die machines are used for different production scales. Flat die machines are commonly selected for farm, test and lower-capacity projects. Ring die machines are usually selected for larger industrial feed mills. For TCPEL inclined roller TCF machines, model selection should be based on formula, target capacity, pellet diameter, voltage and operating hours.

How to Choose a Feed Pellet Machine

Raw material: Confirm corn, soybean meal, bran, grass powder, straw powder, rice husk powder or other ingredients.
Target capacity: Match model capacity with daily working hours and required output.
Pellet diameter: Select the die according to animal type, age and feeding practice.
Power and voltage: Confirm local voltage, frequency and site electrical conditions before quotation.
Line configuration: Decide whether you need only the pellet machine or a complete line with crusher, mixer, conveyor, cooler, screener and packing machine.

Typical Model Reference

TCPEL TCF series model references include TCF250, TCF300, TCF350, TCF400 and TCF550. Typical output ranges from 400-600 kg/h to around 3 t/h, depending on raw material formula, powder size, moisture, pellet diameter, die and roller condition, feeding stability and operator experience.

Quotation Information

Before quotation, send raw material, required capacity, pellet diameter, voltage, working hours and destination port. TCPEL can recommend a suitable single machine or complete feed pellet production line configuration according to the confirmed project scope.

Pellet Diameter Guidance for Animal Feed

Pellet diameter should match animal type, age, formula and local feeding practice. Common feed pellet die sizes include 2.5mm, 4mm, 6mm, 8mm, 10mm and 12mm.

2.5mm: commonly used for small poultry or young animal feed.
4mm: commonly used for poultry feed.
6mm: commonly used for sheep, pig or general livestock feed.
8-12mm: commonly used for cattle or larger animal feed.

The final die size should be confirmed according to animal age, formula, raw material condition and local feeding practice.

Feed Pellet Applications and Line Options

TCPEL feed pellet machines can process prepared feed materials for poultry and livestock projects. For related applications, see Animal Feed Pellet Machine, Cattle Feed Pellet Machine and Chicken Feed Pellet Machine.

Animal feed pellet production video

View the feed pellet application test in an on-page player.

A simple feed pellet line can include a mixer, screw conveyor and feed pellet machine. A commercial line may also include Hammer Mill, cooler, screener and Pellet Packing Machine.

Send us your raw material, required capacity, voltage and pellet diameter. TCPEL will recommend a suitable feed pellet machine or complete feed pellet line solution. WhatsApp: +8615966681218.

Feed Pellet Machine Price and Cost Factors

The final feed pellet machine price depends on your target capacity, motor power, pellet size, voltage, die and roller quantity, and whether you need auxiliary equipment. For a small farm, a single animal feed pellet machine may be enough. For commercial feed production, the animal feed pellet machine cost can also include a feeder, pellet cooler, mixer, hammer mill, packing machine and shipping cost.

TCPEL does not recommend choosing only by the lowest machine price. Send your raw material, required kg/h capacity, pellet diameter, voltage and destination port, and our team will prepare a practical feed pellet production line quotation based on the equipment you really need.

Capacity: higher output normally needs a larger motor, stronger gearbox and matched line equipment.
Pellet size: smaller pellets may need a different die and formula adjustment.
Voltage: 380V, 400V, 415V, 50Hz, 3 phase can be customized for many industrial power supplies.
Line scope: a complete pellet production line may include crushing, mixing, conveying, pelletizing, cooling and packing.

How to Choose Pellet Size for Different Animals

Pellet size should match animal age, feed formula and feeding purpose. The table below is a general starting point; TCPEL can confirm the die hole size after checking your formula and production target.

Animal / Application	Common Pellet Size	Notes
Chicken / poultry starter feed	2.5-3mm	Small pellet size for young birds
Poultry grower feed	3-4mm	Common for chicken and duck feed
Pig feed	4-6mm	Depends on age and formula
Sheep and goat feed	4-6mm	Good for grass and mixed feed
Cattle feed	6-8mm	Larger pellet size for ruminants
Fish feed	customized	Formula and floating requirements need confirmation

Raw Material Requirements Before Pelletizing

Good feed pellets start from stable raw material preparation. The raw material size should usually be smaller than the pellet hole diameter, so corn, soybean meal, bran, grass powder, alfalfa, straw powder and premix can pass through the die smoothly.

Moisture should normally be controlled around 12%-18%, depending on the formula. Materials should be mixed evenly before pelletizing. For complete feed production, a hammer mill and mixer are normally used before the feed pellet machine. Mixer is mentioned here as process equipment, but no internal link is added because the checked mixer URLs are not available.

If you plan to build a full process from raw material crushing to packing, TCPEL can also recommend a complete pellet production line layout.

How to Choose the Right Feed Pellet Machine Capacity

Choosing capacity is not only about the rated output of one machine. A small farm may choose a compact feed pellet machine for daily feed use, while medium feed processing and commercial feed production usually need matched crushing, mixing, conveying and cooling capacity.

For TCF150-TCF450 style projects, many buyers compare 150-2500 kg/h options by daily working hours, formula, raw material type and pellet diameter. If you work only a few hours per day, a smaller model may be enough. If you need stable production for sales or a complete feed mill, line balance becomes more important than one machine output.

Single Feed Pellet Machine or Complete Feed Pellet Production Line?

A single feed pellet machine is suitable when you already have good crushing and mixing conditions. A complete feed pellet production line is better when you need one continuous process for raw material crushing, mixing, pelletizing, cooling, screening and packing.

Depending on your raw material and target capacity, TCPEL can match the feed pellet machine with a hammer mill, mixer, screw conveyor, pellet cooler and packing machine. Before quoting, we usually confirm raw material, capacity, pellet size, voltage and final use.

Die, Roller and Spare Parts Support

Pellet die sizes can be customized for different animal feed formulas. Roller and die are wear parts, so spare dies and rollers can be supplied with the machine for future replacement. Common pellet sizes include 2.5mm, 4mm, 6mm, 8mm, 10mm and 12mm.

Voltage can also be customized for local industrial power supply, such as 380V, 400V or 415V, 50Hz, 3 phase. Tell us your country and workshop power condition before ordering.

Get a Feed Pellet Machine Quote for Your Formula

Send us your raw material, required capacity, pellet size, voltage and destination port. TCPEL will recommend a suitable feed pellet machine or complete feed pellet production line for your project.

Get Feed Pellet Machine Quote

Feed Pellet Machine FAQ

How do I choose the right feed pellet machine capacity?

Start from your target output per hour or per day, then check raw material condition, pellet diameter and working hours. Capacity should be selected as a range because formula and moisture can affect real output.

What pellet size should I choose for chicken, sheep, cattle or pig feed?

Small poultry feed or young animal feed commonly uses 2.5mm. Chicken and poultry feed often uses 4mm. Sheep, pig or general livestock feed often uses 6mm. Cattle or larger animal feed can use 8mm, 10mm or 12mm.

What raw materials can be used in a feed pellet machine?

Common materials include corn powder, soybean meal, wheat bran, rice bran, grass powder, alfalfa, premix and other prepared feed formulas. Raw material should usually be crushed and mixed before pelletizing.

Do I need a mixer before the feed pellet machine?

A mixer is recommended when the formula has several ingredients or additives. Even mixing helps keep pellet quality and nutrition more consistent.

Do I need a cooler after pelletizing?

For continuous production or packing, a pellet cooler is usually recommended. Fresh pellets are warm after pelletizing, and cooling helps reduce temperature before screening and packing.

Can the voltage be customized?

Yes. Common voltage options include 380V, 400V and 415V, 50Hz, 3 phase. Voltage can be customized according to the customer’s local power supply before order.

How often should the die and rollers be replaced?

Replacement time depends on raw material, formula, operating hours and maintenance. Abrasive materials and long working hours will wear parts faster, so spare dies and rollers should be planned before continuous production.

Can TCPEL supply a complete feed pellet production line?

Yes. TCPEL can plan a feed pellet production line with grinding, mixing, conveying, pelletizing, cooling, screening and packing equipment when the buyer needs more than a single machine.

What information should I provide before quotation?

Send raw material, formula, moisture, target capacity, pellet diameter, voltage, workshop space and destination port. These details help TCPEL recommend the model and line configuration.

What capacity feed pellet machine should I choose?

The suitable capacity depends on your raw material, formula, pellet diameter and working hours. TCPEL can recommend a model from small farm use to commercial feed production after confirming your required kg/h output.

What pellet size can the machine make?

Common feed pellet sizes include 2.5mm, 4mm, 6mm, 8mm, 10mm and 12mm. Smaller pellets are often used for poultry, while larger pellets are commonly used for sheep, goats and cattle.

Do I need a hammer mill and mixer before the pellet machine?

If your raw materials are not fine enough or not mixed evenly, a hammer mill and mixer are recommended before pelletizing. A complete feed pellet line normally includes crushing, mixing, pelletizing, cooling and packing.

What moisture is suitable for feed pellet production?

Many feed formulas work around 12%-18% moisture before pelletizing, but the best moisture depends on the raw material and formula. TCPEL can help check the suitable condition before production.

Can the voltage be customized for my country?

Yes. TCPEL can customize common industrial voltages such as 380V, 400V, 415V, 50Hz, 3 phase according to your local power supply.

Can I buy spare dies and rollers together with the machine?

Yes. Pellet die and roller are wear parts. We can supply spare dies and rollers with different hole sizes together with the machine for future replacement.